描述

About this item

• The BN-880 is suitable for open-source flight controllers and is not suitable for flight controls using SCM
• The BN-880 gps module is a dual-module compass with an electronic compass IC HMC5883.
• The BN-880 GPS module has a flash to save configuration. So, you don’t need to reset it the next time you use it
• The DIts data rating is TTL or RS-232, and the default TTL rating is the TTL rating. In order to make it an RS232 output, you need to use a TTL to RS232 conversion line.
• When you use a Raspberry Pi, there is no need for drivers, but you will need to install software.
• Beitian 10th 9th 8th chip BE-880Q BE-880 BK-880 880Q BN-880Q BN-880 Compass QMC5883
• When the blue light flash, it means there is data output.
• Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.

Note

• Please use the GPS module in an open place, the LED will flash after the satellite signal is found. Bad weather and indoor use will affect the accuracy of positioning
• If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional seIrvice for each customer.
• Products equipped with electrical plugs are designed for use in the United States. Plugs and voltages vary by country, and this product may require a transformer or adapter to use at your destination. Please check the compatibility before purchasing

Important information